Related Manuals for Siemens Ruggedcom M2200
Summary of Contents for Siemens Ruggedcom M2200
- Page 1 Preface Introduction Installing Device RUGGEDCOM M2200 Device Management Communication Ports Technical Specifications Installation Guide Certification 07/2018 RC1044-EN-12...
- Page 2 Warranty Siemens warrants this product for a period of five (5) years from the date of purchase, conditional upon the return to factory for maintenance during the warranty term. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
- Page 3 RUGGEDCOM M2200 Installation Guide Contacting Siemens Address Telephone E-mail Siemens Canada Ltd Toll-free: 1 888 264 0006 ruggedcom.info.i-ia@siemens.com Industry Sector Tel: +1 905 856 5288 300 Applewood Crescent Fax: +1 905 856 1995 Concord, Ontario https://www.siemens.com/ruggedcom Canada, L4K 5C7...
- Page 4 RUGGEDCOM M2200 Installation Guide...
-
Page 5: Table Of Contents
RUGGEDCOM M2200 Installation Guide Table of Contents Table of Contents Preface ......................Alerts ..............................vii Related Documents ..........................viii Accessing Documentation ........................viii Training ............................viii Customer Support ..........................viii Chapter 1 Introduction ..................... 1.1 Feature Highlights ........................1 1.2 Description ........................... 2 1.3 Required Tools and Materials ...................... - Page 6 RUGGEDCOM M2200 Table of Contents Installation Guide Chapter 4 Communication Ports ..................4.1 Copper Ethernet Ports ......................... 22 4.2 Fiber Optic Ethernet Ports ......................23 Chapter 5 Technical Specifications .................. 5.1 Power Supply Specifications ......................25 5.2 Failsafe Relay Specifications ......................26 5.3 Supported Networking Standards ....................26 5.4 Copper Ethernet Port Specifications ....................
-
Page 7: Preface
Installation Guide Preface Preface This guide describes the RUGGEDCOM M2200. It describes the major features of the device, installation, commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device. -
Page 8: Related Documents
Siemens Sales representative. Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request... -
Page 9: Customer Support
RUGGEDCOM M2200 Installation Guide Preface • Contact a local Siemens representative from Sales, Technical Support, Training, etc. • Ask questions or share knowledge with fellow Siemens customers and the support community Customer Support... - Page 10 RUGGEDCOM M2200 Preface Installation Guide Customer Support...
-
Page 11: Introduction
Introduction Introduction The RUGGEDCOM M2200 is a rugged, fully managed, modular Ethernet switch specifically designed to operate reliably in electrically harsh and climatically demanding utility substation, railway and industrial environments. The RUGGEDCOM M2200’s superior rugged hardware design coupled with the embedded Rugged Operating System (ROS) provides improved system reliability and advanced cyber security and networking features, making it ideally suited for creating Ethernet networks for mission-critical, real-time, control applications. -
Page 12: Description
Section 1.2 Description The RUGGEDCOM M2200 features various ports, controls and indicator LEDs on the display panel for connecting, configuring and troubleshooting the device. The display panel can be located on the rear, front or top of the device, depending on the mounting configuration. -
Page 13: Required Tools And Materials
Section 3.1, “Connecting to the Device”. Section 1.3 Required Tools and Materials The following tools and materials are required to install the RUGGEDCOM M2200: Tools/Materials Purpose AC power cord (16 AWG) For connecting power to the device. CAT-5 Ethernet cables For connecting the device to the network. -
Page 14: Cabling Recommendations
Siemens also does not recommend using copper Ethernet ports to interface with devices in the field across distances that could produce high levels of ground potential rise (i.e. greater than 2500 V), during line-to-ground fault conditions. -
Page 15: Supported Fiber Optic Cables
RUGGEDCOM M2200 Chapter 1 Installation Guide Introduction 1000Base- Cabling Category Required Action TX Compliant No action required. > 6 Connector and wiring standards to be determined. Follow these recommendations for copper data cabling in high electrical noise environments: • Data cable lengths should be as short as possible, preferably 3 m (10 ft) in length. Copper data cables should not be used for inter-building communications. - Page 16 Chapter 1 RUGGEDCOM M2200 Introduction Installation Guide Supported Fiber Optic Cables...
-
Page 17: Installing Device
This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens Canada Ltd could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment. -
Page 18: Unpacking The Device
Section 2.3 Mounting the Device The RUGGEDCOM M2200 is designed for maximum mounting and display flexibility. It can be equipped with connectors that allow it to be installed in a 48 cm (19 in) rack or directly on a panel. IMPORTANT! Heat generated by the device is channeled outwards from the enclosure. -
Page 19: Mounting The Device To A Rack
Section 2.3.1 Mounting the Device to a Rack The RUGGEDCOM M2200 can be secured to a standard 48 cm (19 in) rack using separately purchased rack mount adapters. The adapters can be installed at the front or rear of the chassis. -
Page 20: Mounting The Device To A Panel
Section 2.3.2 Mounting the Device to a Panel For panel installations, the RUGGEDCOM M2200 can be equipped with panel adapters pre-installed on each side of the chassis. The adapters allow the device to be attached to a panel using screws. To mount the device to a panel, do the following: Place the device against the panel and align the adapters with the mounting holes. -
Page 21: Connecting The Failsafe Alarm Relay
Control of the failsafe relay output is configurable through ROS. One common application for this relay is to signal an alarm if a power failure occurs. For more information, refer to the ROS User Guide for the RUGGEDCOM M2200. The following shows the proper relay connections. -
Page 22: Connecting Power
The RUGGEDCOM M2200 supports a single or dual redundant AC and/or DC power supplies. The RUGGEDCOM M2200 can be equipped with either a screw-type or pluggable terminal block, which provides power to both power supplies. The screw-type terminal block is installed using Phillips screws and compression plates, allowing either bare wire connections or crimped terminal lugs. -
Page 23: Connecting Ac Or Dc Power
RUGGEDCOM M2200 Chapter 2 Installation Guide Installing Device Section 2.5.1 Connecting AC or DC Power To connect a single high AC, high DC or low DC power supply to the device, do the following: CAUTION! Electrical hazard – risk of damage to equipment. Before testing the dielectric strength (HIPOT) in the field, remove the metal jumper. -
Page 24: Wiring Examples
Chapter 2 RUGGEDCOM M2200 Installing Device Installation Guide Install the supplied metal jumper between terminals 2, 4 and 6 to connect the surge ground terminals to the chassis ground terminal. The surge ground terminals are used as the ground conductor for all surge and transient suppression circuitry internal to the unit. - Page 25 RUGGEDCOM M2200 Chapter 2 Installation Guide Installing Device Figure 7: Single AC Power Supply Figure 8: Single DC Power Supply Wiring Examples...
- Page 26 Chapter 2 RUGGEDCOM M2200 Installing Device Installation Guide Figure 9: Dual AC Power Supply Figure 10: Dual DC Power Supply Wiring Examples...
- Page 27 RUGGEDCOM M2200 Chapter 2 Installation Guide Installing Device Figure 11: Dual AC/DC Power Supply Wiring Examples...
- Page 28 Chapter 2 RUGGEDCOM M2200 Installing Device Installation Guide Wiring Examples...
-
Page 29: Device Management
Connecting to the Device The following describes the various methods for accessing the ROS console and Web interfaces on the device. For more detailed instructions, refer to the RUGGEDCOM ROS User Guide for the RUGGEDCOM M2200. RS232 Console Port Connect a workstation directly to the RS232 console port to access the boot-time control and ROS interfaces. The console port provides access to ROS's console and Web interfaces. -
Page 30: Configuring The Device
Chapter 3 RUGGEDCOM M2200 Device Management Installation Guide Name Description Comment RJ45 Male Female Read to Send Ring Indicator The DSR, DCD and DTR pins are connected together internally. The CTS and RTS pins are connected together internally. RI is not connected. -
Page 31: Communication Ports
Communication Ports Communication Ports The RUGGEDCOM M2200 can be equipped with various types of communication ports to enhance its abilities and performance. With five available slots, the RUGGEDCOM M2200 supports a variety of one- or two-port fiber or copper Ethernet module of various speeds with up to nine Gigabit Ethernet (1 Gbps) ports. -
Page 32: Copper Ethernet Ports
Section 4.1 Copper Ethernet Ports The RUGGEDCOM M2200 supports several 10/100Base-TX and 10/100/1000Base-TX Ethernet ports that allow connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with Micro-D male connectors. The Micro-D connectors are directly connected to the chassis ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables. -
Page 33: Fiber Optic Ethernet Ports
RUGGEDCOM M2200 Chapter 4 Installation Guide Communication Ports Name Description 10/100Base-TX 1000Base-TX BI_DB- Transmit Data- or Bi- Directional Pair B- Reserved (Do BI_DD+ Receive Data- Not Connect) or Bi-Directional Pair D+ Reserved (Do BI_DD- Receive Not Connect) Data- or Bi-... - Page 34 Chapter 4 RUGGEDCOM M2200 Communication Ports Installation Guide Fiber Optic Ethernet Ports...
-
Page 35: Technical Specifications
Section 5.8, “Dimension Drawings” Section 5.1 Power Supply Specifications The RUGGEDCOM M2200 can be equipped with the following power supplies: CAUTION! Electrical hazard – risk of damage to the device. Disconnect the device from the power supply if power input is above or below the specified input range. -
Page 36: Failsafe Relay Specifications
NOTE • Maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associate when determining maximum segment distances. • All optical power numbers are listed as dBm averages. -
Page 37: Fiber Optic Ethernet Port Specifications
All optical power numbers are listed as dBm averages. Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associates when determining maximum segment distances. -
Page 38: Operating Environment
RUGGEDCOM M2200 Technical Specifications Installation Guide Section 5.6 Operating Environment The RUGGEDCOM M2200 is rated to operate under the following environmental conditions. Ambient Operating -40 to 85°C (-40 to 185 °F) Temperature Ambient Storage Temperature -40 to 85°C (-40 to 185 °F) - Page 39 RUGGEDCOM M2200 Chapter 5 Installation Guide Technical Specifications 438.15 Figure 19: Overall Dimensions Dimension Drawings...
- Page 40 Chapter 5 RUGGEDCOM M2200 Technical Specifications Installation Guide 32.76 21.08 11.68 479.29 461.01 4.57 Figure 20: Rack Mount Dimensions Dimension Drawings...
- Page 41 RUGGEDCOM M2200 Chapter 5 Installation Guide Technical Specifications 467.4 275.6 482.6 Figure 21: Panel Mount Dimensions Dimension Drawings...
- Page 42 Chapter 5 RUGGEDCOM M2200 Technical Specifications Installation Guide Dimension Drawings...
-
Page 43: Certification
RUGGEDCOM M2200 Chapter 6 Installation Guide Certification Certification The RUGGEDCOM M2200 device has been thoroughly tested to guarantee its conformance with recognized standards and has received approval from recognized regulatory agencies. CONTENTS • Section 6.1, “Approvals” • Section 6.2, “EMC and Environmental Type Tests”... -
Page 44: European Union (Eu)
Information Technology Equipment – Radio Disturbance Characteristics – Limits and Methods of Measurement The device is marked with a CE marking and can be used throughout the European community. A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd. For contact information, refer to “Contacting Siemens”. -
Page 45: Ised
Installation Guide Certification Section 6.1.5 ISED This device is declared by Siemens Canada Ltd to meet the requirements of the following ISED (Innovation Science and Economic Development Canada) standard: • CAN ICES-3 (A)/NMB-3 (A) Section 6.1.6 This device was designed and manufactured using a certified ISO (International Organization for Standardization) quality program that adheres to the following standard: •... - Page 46 Chapter 6 RUGGEDCOM M2200 Certification Installation Guide EMC Type Tests per IEC 61850-3 NOTE • In the case of an all fiber port configuration, this product meets all Class 2 requirements. Otherwise, all Class 1 requirements are met for copper ports.
- Page 47 EMC Immunity Type Tests per IEEE 1613 NOTE The RUGGEDCOM M2200 meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for copper ports. Class 1 allows for temporary communication loss, while Class 2 requires error-free and interrupted communications.
- Page 48 Chapter 6 RUGGEDCOM M2200 Certification Installation Guide Description Test Levels AC Power Ports 2.5 kV Common 1 kV differential mode @ 1 MHz HV Impulse Signal Ports 5 kV (Fail-Safe Relay Output) DC Power Ports 5 kV AC Power Ports...
- Page 49 RUGGEDCOM M2200 Chapter 6 Installation Guide Certification Test Description Test Levels MIL-STD-1275B Power Quality Per Standard EMC and Environmental Type Tests...
- Page 50 Chapter 6 RUGGEDCOM M2200 Certification Installation Guide EMC and Environmental Type Tests...