Siemens SCALANCE M-800 Series Getting Started page 4

Preface
Further documentation
● "Industrial Remote Communication Remote Networks - SCALANCE M874" operating
instructions
This document contains information with which you will be able to install and connect up
a device of the SCALANCE M874 product line. The configuration and the integration of
the device in a network are not described in these instructions
● "Industrial Remote Communication Remote Networks - SCALANCE M81x" operating
instructions
This document contains information with which you will be able to install and connect up
a device of the SCALANCE M812, M816 product line. The configuration and the
integration of the device in a network are not described in these instructions
● "Industrial Remote Communication Remote Networks - SCALANCE M-800 Web Based
Management" configuration manual
This document is intended to provide you with the information you require to install,
commission and operate the device. It provides you with the information you require to
configure the devices.
● You will find further information about working with the SCT (Security Configuration Tool)
in the "Industrial Ethernet Security - Basics and Application" configuration manual. You
will find this document on the Internet under the following entry ID: 56577508
(http://support.automation.siemens.com/WW/view/en/56577508)
● The "SIMATIC NET Industrial Ethernet Network Manual" contains information on other
SIMATIC NET products that you can operate along with the devices of this product line in
an Industrial Ethernet network. There, you will find among other things optical
performance data of the communications partners that you require for the installation.
You will find this document on the Internet under the following entry ID: 27069465
(http://support.automation.siemens.com/WW/view/en/27069465)
4
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04