Connecting M81X To Adsl; Procedure In Principle - Siemens SCALANCE M-800 Series Getting Started

1.2

Connecting M81x to ADSL

1.2.1

Procedure in principle

In this example the SCALANCE M81x that is in the factory settings status is assigned an IP
address. Following this, the device will be configured using Web Based Management
(WBM).
Structure
Required devices/components
● 1 x M812 or 1 x M816 (optionally also: a suitably installed standard rail with fittings)
● ADSL is enabled
● 1 x 24 V power supply with cable connector and terminal block plug
● 1 x PC for configuring the device.
● The required network cable, TP cable (twisted pair) complying with the IE FC RJ-45
standard for Industrial Ethernet
Steps in configuration
To connect an M81x to the landline, the following steps are necessary:
1. Setting up SCALANCE M81x and network (Page 30).
2. Launching Web Based Management (Page 30)
3. Logging in to Web Based Management (Page 33)
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
Connecting SCALANCE M-800 to WAN
1.2 Connecting M81x to ADSL
29