Configuring The Vpn Remote End; Configuring A Vpn Connection - Siemens SCALANCE M-800 Series Getting Started

VPN tunnel between SCALANCE M-800 and S612
3.3 Secure VPN tunnel with certificates
3.3.3.3

Configuring the VPN remote end

Procedure
1. Click on "Security" > "IPSec VPN" in the navigation area and on the "Remote End" tab in
the content area.
2. Enter the name of the VPN partner (tunnel endpoint) in "Remote End Name", e.g. S612.
3. Click "Create". A new row is created in the table.
4. Configure the VPN remote end with the following settings from the configuration file:
5. Click "Set Values".
3.3.3.4

Configuring a VPN connection

Requirement
● The VPN remote end has been created.
Procedure
1. Click on "Security" > "IPSec VPN" in the navigation area and on the "Connection" tab in
the content area.
2. In "Connection Name" enter a name for the VPN connection.
3. Click "Create". A new row is created in the table.
132
Remote Mode
Remote Typ
Remote Address
Remote Subnet
Standard
manual
91.19.6.84/32
WAN IP address of the DSL router
192.168.11.0/24
Getting Started, 06/2015, C79000-G8976-C337-04
SCALANCE M-800 Getting Started