Geberit Chicago Faucets Commander Manual page 25

SECTION 2: Scanning, Mode and Setting Adjustments
Manual Teach In Setting
Enables CLEAN mode activation without a Commander HPU. Turn
this on, by holding thumb over eye for 5 seconds or until water stops
flowing, to enable manual activation of Clean mode for cleaning crew.
Leaving it set to "off" could prevent vandalism or tampering.
Manual Teach-In — Choose "On"
to allow for manual activation.
Factory setting is assigned to "Off".
Set — Tap "SET" to save and
execute setting
Chicago Faucets Commander Handheld Programming Unit User Guide
® ™
Safety Shut-Off Time Setting
Limits the maximum running time
in Normal Mode.
Safety Shutoff Time — Choose
"Factory" preset
OR
Choose "Custom" setting using
slide bar to set time from 30 to
180 seconds. Factory setting is 40
seconds.
Set — Tap "SET" to save and
execute setting
Page 25 CF2026 / 07/19