Introduction, Device, Updates - Geberit Chicago Faucets Commander Manual

Section 1: Introduction, Device, Updates
1.1 Introduction
Thank you for choosing the Chicago Faucets Commander Handheld
Programming Unit. Commander allows you to change settings quickly
and easily on your Chicago Faucets HyTronic
products. This guide will help you use the Commander to scan, modify
settings, use applicable diagnostic tools and other advanced functions
for all Chicago Faucets electronic fittings.
If you have not done so, REGISTER your device to access software,
firmware or hardware updates and to receive notification of future
updates. Register and download Commander Desktop at
chicagofaucets.com/commander.
Chicago Faucets Commander Handheld Programming Unit User Guide
® ™
, E-Tronic , or ELR
® ®
1.2 Device overview
IR Communication Eye
Touch Screen
Navigation
Mini USB Port
Use included cable
to transfer files to and from PC
Basic Commands
BACK To previous screen
HOME To Main Menu
SET To save and execute setting; and return to previous screen
SAVE Saves data to Commander device only
CANCEL Stops command and returns to previous screen
< Information list continues on previous screen
> Information list continues on next screen
Page 3
On/Off (Sleep) Button
Press and hold to power ON unit.
Quick press to SLEEP.
Also used to put device into programming mode
during updates. For any power down, device returns
to Main Menu upon power up.
(2) "AA" batteries (included)
6´ USB Cable (included)
Reset Button
Used to take device out of programming
mode during updates and to restart device
when not responding. Note: Does not reset
fitting!
CF2026 / 07/19