Geberit Chicago Faucets Commander Manual page 17

SECTION 2: Scanning, Mode and Setting Adjustments
2.6.1.1 Running Mode
Normal — Fitting operates when user is detected and stops immediately after user detection ends. Saves water versus metering fittings which run for a
prescribed amount of time after every activation. Default factory mode (for non-SSPS fittings, E-Tronic, and ELR).
Normal Mode — Maximum run
time duration pre-set at factory.
See Section 2.6.3 to change
this value.
—
Set Tap "SET" to save and
execute setting.
Chicago Faucets Commander Handheld Programming Unit User Guide
® ™
Page 17 CF2026 / 07/19