Geberit Chicago Faucets Commander Manual page 20

SECTION 2: Scanning, Mode and Setting Adjustments
2.6.1.4 Running Mode
Scrub — Fitting can be set for longer run times for health care or surgical scrub sinks. Automatically runs after user is detected and does not end until after
assigned time.
Scrub Mode Running Time —
Choose from "Presets" to set
common run times.
Choose "Custom" and adjust running
time from 1 to 180 seconds.
Set — Tap "SET" to save and
execute setting.
Chicago Faucets Commander Handheld Programming Unit User Guide
® ™
Page 20 CF2026 / 07/19