Geberit Chicago Faucets Commander Manual page 19

SECTION 2: Scanning, Mode and Setting Adjustments
2.6.1.3 Running Mode
Cleaning — Fitting is deactivated and will not operate when user is detected to allow for cleaning or maintenance without running water. Fitting automatically
returns to current mode after prescribed time or 30 minutes have elapsed, or set to "off".
Cleaning Mode Running Time —
Choose factory "preset" for 2 minutes
duration.
Choose custom to set time from 1 to 10
minutes in duration.
Set — Tap "SET" to save and execute
setting. A warning screen will appear.
Tap "Yes" to activate, or "Cancel" to
end the command without saving and
executing.
Chicago Faucets Commander Handheld Programming Unit User Guide
® ™
Warning and activation confirmation
Page 19 CF2026 / 07/19