Geberit Chicago Faucets Commander Manual page 24

SECTION 2: Scanning, Mode and Setting Adjustments
Smart Power Saving Setting
This setting can save power and
extend battery life by reducing
scan frequency.
Smart Power Saving Interval —
Choose preset interval between
"no detections" and when reduced
scanning frequency should begin.
Default is "Off".
OR
Choose "Custom" setting from 6 to
48 hours.
Set — Tap "SET" to save and
execute setting.
Chicago Faucets Commander Handheld Programming Unit User Guide
® ™
Hygiene Flush Setting
For fittings with low or infrequent
use, setting will run fitting for an
assigned time to keep fresh water
in lines and refill trapways.
Hygiene Flush Interval — Choose
"On" to enable setting.
Choose "custom" interval between
activations time from 1 to 168 hrs
using slider bar. Fitting will run for
prescribed time if no detections
within this custom time.
Factory setting is assigned to "Off".
Hygiene Flush Duration —
Choose "Duration" using slider bar
from 3 to 180 sec.
Set — Tap "SET" to save and
execute setting
Page 24 CF2026 / 07/19