Geberit CHICAGO FAUCETS HyTronic Traditional Lavatory User's Manual & Installation Instructions

HyTronic User Guide Installation Instructions
®
For single supply and dual supply HyTronic faucets

Overview

Chicago Faucets deck mounted faucets feature cast brass bodies and precision cartridges for years of reliable
operation. Metering models with adjustable cycle time offer true water savings.

Notice to the Installer

• Make sure there is enough space and lighting available during installation and service
• Do not modify or convert this Chicago Faucets product yourself. All warranties will be voided.
Pressurized plumbing fixtures shall be installed in accordance with manufacturer's recommendations. The supply piping
to these devices shall be securely anchored to the building structure to prevent installed device from unnecessary
movement when operated by the user. Care shall be exercised when installing the device to prevent marring the
exposed surface.
NOTE: The information in this manual is subject to change without notice.
Please leave this manual with the facility manager after completing the faucet installation. This document contains
information necessary for routine maintenance and servicing.
NOTE: Before installation, turn off water supplies to existing faucet and remove faucet if replacing. Clean faucet basin
and clear away debris. Flush all supply lines before connecting to faucet. Failure to do so can result in debris clogging
the inlets and/or cartridges.
NOTE: Before installing a new ceramic cartridge flush lines completely.

Safety Information

Read this entire user guide to ensure proper installation. Compliance and conformity to local codes and ordinances is
the responsibility of the installer.
The following safety notes must always be complied with during handling of this product:
• FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
• Make sure there is enough space and lighting available during installation and service.
• Do not modify or convert this Chicago Faucets product yourself. All warranties will be voided.
Internal Antenna Specifications
• Peak Gain of the antenna: -5.47 dBi
• Frequency range: 2400-2500 MHz
• FCC ID: 2APTX-CFC01
Important
• Installation may be performed at different times of construction by different individuals. For this reason, these
instructions should be left on-site with the facility or maintenance manager.
• Pressurized plumbing fixtures shall be installed in accordance with manufacturer's recommendations. The supply
piping to these devices shall be securely anchored to the building structure to prevent installed device from
unnecessary movement when operated by the user. Care shall be exercised when installing the device to prevent
marring the exposed significant surface.
• Do not use pipe dope.
• Flush all the water supply lines before making connections.
This faucet comes with all the components needed for installation, however, some tools and supplies are not included.
• Basin Wrench
• Adjustable Wrench
• Adjustable Locking Pliers
NOTE: Do not use pipe dope on faucet and supply connections.
Possible solenoid contamination could occur and will void any warranty.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
For additional technical assistance, call 800/TEC-TRUE (800-832-8783) or visit our website at chicagofaucets.com.
1
• Plumber's Putty
• Hex Key (supplied)
• Aerator Key (supplied)
Traditional
Lavatory
Contemporary
Lavatory
Edge
Curve
Gooseneck
Wall Mount