Disable_Privacy_Ui; Disable_Oct_Enddial; Force_Oct_Enddial - Nortel 1120E Administration Manual

42 Configure the provisioning server
•
•
•
•
•
Copyright © 2008, Nortel Networks
.
— NETWORK - downloads the user's address book from the network
(MCS). New address book entries are uploaded to the network.
— LOCAL - creates a user address book and stores it locally on the IP
Phone
— BOTH - attempts to download a network address book and keep a
copy on the IP Phone. If a network address book is available, the IP
Phone 1120E functions as if NETWORK mode has been selected.
HOLD_TYPE [RFC2543 | RFC3261] is used to select the protocol to
hold a call. The default setting is RFC3261
— RFC2543 - RFC 2543 is a standard protocol of the Internet
Engineering Task Force (IETF).
— RFC3261 - RFC3261 is a standard protocol of the IETF.
DISABLE_PRIVACY_UI [YES | NO] is a flag to disable the privacy
setting in UI menus. Disabling the privacy setting in UI menus disables
the user ability to set privacy options.
— YES - disables the privacy setting in the UI menus.
— NO - enables the privacy setting in the UI menus. NO is the default.
DISABLE_PRIVACY_UI [YES | NO] is a flag to disable the privacy
setting in UI menus.
— YES - disables the privacy setting in the UI menus.
— NO - enables the privacy setting in the UI menus. NO is the default.
DISABLE_OCT_ENDDIAL [YES | NO] is a flag used to configure the
pound (#) key. The default setting is YES.
— YES - the pound (#) key initiates dialing when pressed after a
telephone number is entered.
— NO - the pound (#) key functions as any other digit or character
on the dial pad typically used in networks that use vertical service
codes or access codes.
FORCE_OCT_ENDDIAL [YES | NO] is a flag used to override attempts
to change the function of the pound (#) key on the Graphical User
Interface (GUI). The default setting is NO.
— YES - overrides attempts to change the function of the pound (#)
key on the GUI.
— NO - does not override a change of the function of the pound (#)
key on the GUI.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008