Set Ip; Net Mask; Gateway; Dns Ip - Nortel 1120E Administration Manual

84 Device Settings on the IP Phone 1120E with SIP Firmware
•
•
•

SET IP

Select SET IP in the Device Settings menu to configure the IP address.

Net Mask

Enter a subnet mask In the Net Mask field.

Gateway

Enter an IP address of the local gateway in the Gateway field.

DNS IP

Configure the Domain Name Server (DNS) IP.

Voice VLAN

Configure the Voice VLAN.
Table 16
Telephony Port (incoming)
Voice VLAN Setting
No (default setting)
Auto (Not available if DHCP is set to No)
Copyright © 2008, Nortel Networks
.
Gateway
DNS IP
Provisioning server IP, protocol, and, if user authentication is required to
access the provisioning server, the user credentials
Note: TFTP protocol does not require user authentication. Device ID
and password are ignored. FTP protocol requires user authentication
and the default Device ID is anonymous with no password.
HTTP protocol can operate with or without user authentication. If
no authentication is required, make sure to clear the Device ID and
password fields in the configuration dialogue.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
Result
All telephony traffic that is transmitted on the
telephony port is forwarded untagged
Enable Automatic VLAN Discovery for Voice
VLAN. Initial DHCP request is forwarded based
on the Data VLAN policy (for example, untagged
if Data VLAN is disabled, or tagged with the
Data VLAN ID if Data VLAN is enabled) to obtain
Voice VLAN IDs. Subsequent DHCP requests
using the acquired Voice VLAN IDs and the
resolution of a Voice VLAN determine the final
Voice VLAN ID used for signaling and the media
traffic on the telephony port. Note: This means
that if a Data VLAN ID is configured in the IP
Phone 1120E and the Voice VLAN is set to Auto
(Automatic Voice VLAN Discovery), the DHCP
27 May 2008