New In This Release; Other Changes; Revision History - Nortel 1120E Administration Manual

New in this release

Other changes

For a detailed history of past releases of this document, see
history" (page

Revision history

May 2008
Standard 02.03. This document is up-issued to reflect changes in technical
content.
November 2007
Standard 02.02. This document is up-issued to reflect changes in the
technical information in response to change requests. A note was added
stating that NAT_SIGNALLING is required for networks that use STUN
or SIP_PING for NAT traversal. The commands FORCE_OCT_END
and OCT_END were changed to FORCE_OCT_ENDDIAL and
DISABLE_OCT_ENDDIAL respectively. A change was also made to ensure
that the value of 802.1P_MEDIA parameter in the QoS and ToS commands
must be set to -1 to be able to have a voice path.
July 2007
Standard 02.01. This document is up-issued to support SIP Firmware for IP
Phone 1120E Maintenance Release 1.1.
March 2007
Standard 01.02. This document is up-issued to incorporate an addition to
the Maintenance and Troubleshooting section.
January 2007
Standard 01.01. This is a new document created to support the IP Phone
1120E with SIP Firmware.
Copyright © 2008, Nortel Networks
.
7).
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008
7
"Revision