Nortel 1120E Administration Manual page 22

22 Before installation
Footstand kit, Charcoal
Telephone number label and lens kit
2.3 m (7 ft) CAT5 Ethernet cable
Table 3
1100 series phones separably orderable parts
Item
Power adapter contents include:
Global power supply (optional)
AC cord package includes one of the following:
1.8 m (5.9 ft), 10 amp, IEC320-C13 North
America
3 m (9.9 ft),125 VAC 13 amp, NA power cord,
NEMA North America, Middle East, Taiwan,
Philippines, Thailand, and Japan
2.4 m (8 ft), 240 VAC 10 amp, ANZ power cord
AS-3, Australia, New Zealand
250 VAC, Option 11C Standard European power
cord, Other EMEA, Kenya, Korea, Thailand,
Indonesia, Vietnam, India, Pakistan
3 m (9.9 ft) 125 VAC, Option 11C Swiss power
cord Switzerland
240 VAC, Option 11C UK power cord Hong
Kong, Ireland, United Kingdom, Singapore,
Malaysia, Bangladesh, Brunei, Sri Lanka
3 m (9.9 ft), 125 VAC, Option 11C Denmark
power cord Denmark
4
Copyright © 2008, Nortel Networks
.
The IP Phone 1120E can be powered either by Power Over Ethernet
(POE) or powered through an external power supply. Order the
external power supply separately.
CAUTION
The IP Phone 1120E must be plugged into a 10/100-BaseT
Ethernet jack. Severe damage occurs if this IP Phone
1120E is plugged into an ISDN connection.
Ensure that the location meets the network requirements:
•
a DNS server and a DHCP server with DHCP relay agents
installed, configured, and running. It is possible to run the IP
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
NTYS11AA70
NTYS12AA
NTYS13AA
Order number
N0023000
NTYS14AA
NTTK14AB
NTTK15AA
NTTK16AB
NTTK17AB
NTTK18AB
NTTK22AB
27 May 2008