Force_Cfwd_Notify; Dscp_Data - Nortel 1120E Administration Manual

44 Configure the provisioning server
•
QoS and ToS commands
•
•
•
•
•
•
Copyright © 2008, Nortel Networks
.
— NO - the ring splash is not be played.
FORCE_CFWD_NOTIFY [YES | NO ] allows the administrator to force
the behavior of the DEFAULT_CFWD_NOTIFY value on all users who
login to the IP Phone 1120E. The default setting is NO.
— YES - the DEFAULT_CFWD_NOTIFY configuration value is forced
into effect for the user.
— NO - the configuration value is not be forced into effect for the user.
DSCP_CONTROL [x] is a value entered in decimal format between -1
and 63. If the value is -1, the DSCP value is picked up by the Service
Package. The default value is 40.
— x - a value from -1 to 63 indicating the DSCP value.
802.1P_CONTROL [x] is a value entered in decimal format between -1
and 7 representing the 802.1P value in the SIP signaling packets. If the
value is -1, the 802.1P value is retrieved from the Service Package.
The default value is 6.
— x - the value from -1 to 7 indicating the 802.1P value.
DSCP_MEDIA [x] is a value entered in decimal format between -1 and
63 representing the DSCP value in the Real-time Transfer Protocol
packets. If the value is -1, the DSCP value is retrieved from the Service
Package. The default value is 44.
— x - a value from -1 to 63 indicating the DSCP value.
802.1P_MEDIA [x] is a value entered in decimal format between -1 and
7 representing the 802.1P value in the IP Phone 1140 Media (RTP)
packets. If the value is -1 then the 802.1P value is retrieved from the
Service Package is the 802.1 setting for media Real-time Transport
Protocol (RTP). The default value is -1.
— x - a value from -1 to 7 indicating the 802.1P value.
DSCP_DATA [x] is a value entered in decimal format between -1 and
63 representing the DSCP value in the provisioning packets. If the
value is -1, the DSCP value is retrieved from the Service Package. The
default value is 40.
— x - a value from -1 to 63 indicating the DSCP value.
802.1P_DATA [x] is a value entered in decimal format between -1 and 7
representing the 802.1P value in the provisioning packets. If the value
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008