Max_Rejectreasons; Max_Callsubject; Max_Presencenote; Def_Lang - Nortel 1120E Administration Manual

•
•
•
•
•
•
•
Copyright © 2008, Nortel Networks
.
Create the Device Configuration file on the provisioning server 41
MAX_OUTBOX_ENTRIES 100 limits the number of entries in the
outbox to 100. The default limit is 100.
— x - the maximum number of outbox entries.
MAX_REJECTREASONS [x] is used to restrict the maximum number
of Call Decline Reasons (Prefs -> Feature Options -> Call Decline
Reasons) and takes a number as a parameter. The default limit is 20.
— x - the maximum number of reject reasons.
MAX_CALLSUBJECT [x] is used to restrict the maximum number of
call subjects(Prefs -> Feature Options -> Call Subject) and takes a
number as a parameter. The default limit is 20.
— x - the maximum number of call subject reasons.
MAX_PRESENCENOTE [x] is used to restrict the maximum number
of presence notes and takes a number as a parameter. The default
limit is 20.
— x - the maximum number of presence notes that an IP Phone 1120E
can receive.
DEF_LANG [language] is a command used for setting the default
language. Select one of the supported languages from the language
list downloaded. Note that the corresponding language file must be
downloaded and stored in the IP Phone 1120E through the [LANGUAGE]
section in Provisioning. If the language file is not stored in the IP Phone
1120E, the default language English is used.
— language - the default language used.
MAX_IM_ENTRIES [x] is used to set the maximum number of instant
message (IM) entries and takes a number as a parameter. Once the
maximum number is reached, the oldest IM is deleted without any user
notification. The default limit is 999.
— x - the maximum number of instant messages.
MAX_ADDR_BOOK_ENTRIES [x] is used to set the maximum number
of entries in the address book and takes a number as a parameter. The
default limit is 100.
— x - the maximum number of address book entries.
ADDR_BOOK_MODE [NETWORK | LOCAL | BOTH] is a command
to choose the address book that is used to search for other users. The
default setting is NETWORK.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
27 May 2008