6.1
Language
You can choose the language in which all the menus will be displayed.
6.2
Sensor factor
In this screen the sensor factor is shown. It should coincide with the Fc parameter on the
sensor label.
6.3
Converter factor
The electronic converter factor is shown. It should coincide with the Fe parameter on the
converter label.
6.4
Nominal diameter
The value of the nominal diameter is always the internal diameter of the sensor.
6.5
Diagnosis
When the flowmeter is not working properly, it can be useful to test some parts of the
instrument in order to locate the problem.
In this section a list with two possible options appears.
30