Table of Contents
Advertisement
4
CONVERTER INTERFACE
The MX4 converter has a graphic LCD and a keyboard with 4 push buttons.
The keyboard has four numeric keys to introduce the values of installation and
programming. Two of these keys are used also as cursors.
The following figure shows the functionality of the converter keys.
(Down / Left) To switch between flow
rate, totalizer and fluid velocity screens.
To change to the digit on the left.
Into the menu, to scroll down.
(Up) To switch between flow rate,
totalizer and fluid velocity screens. To
increase the digit.
Into the menu, to scroll up.
(Enter) To validate the data.
To
enter
into
programming modes of the converter.
To exit from an informative text.
(Escape) To return to the previous menu.
To exit from a screen without validating
data.
26
installation
and
Advertisement
Table of Contents
