Installing The Sata Drive - DFI KS150-BT User Manual

Installing the SATA Drive

1. The SATA drive bay is located on the system.
SATA drive bay
2. Remove the 4 mounting screws on the HDD bracket and then put them in a safe place for
later use.
Mounting screw
Chapter 3 Installing Devices
Chapter 3
3. Insert the SATA drive into the HDD bracket and connect the SATA power/data connector on
the SATA drive to the SATA power/data cable secured on the HDD bracket.
SATA drive
HDD bracket
SATA power/data cable
4. Then, align mounting holes of the SATA drive with mounting holes on the back side of the
HDD bracket and use the provided mounting screws to secure the drive in place.
Mounting screw
13
www.dfi .com