Installing The Sata Drive - DFI KS104-CD User Manual

Installing the SATA Drive

1. Locate the SATA drive bay on the system.
2. Remove the 4 mounting screws that secure the HDD brackets to the drive bay.
Chapter 3 Installing Devices
Chapter 3
3. Align the mounting holes of the SATA drive with the mounting holes on the HDD bracket
and then use the provided mounting screws to secure the drive in place.
HDD bracket
SATA drive bay
Mounting screw
4. Connect the SATA data cable and the SATA power cable to connectors on the SATA drive.
Mounting screw
13
Mounting screw
SATA power/data
connector
SATA power cable
SATA data cable
SATA drive
www.dfi .com