Installing the SATA Drive
1. The SATA drive bay is located on the system.
SATA drive bay
2. Remove the 4 mounting screws on the HDD br acket and then put them in a saf e place f or
later use.
Mounting screw
Chapter 3 Installing Devices
Chapter 3
3. Insert the S ATA drive into the HDD br acket and connect the S ATA power/data connector on
the SATA drive to the S ATA power/data cable secured on the HDD br acket.
SATA drive
HDD bracket
SATA power/data cable
4. Then, align mounting holes of the S ATA driv e with mounting holes on the back side of the
HDD bracket and use the pro vided mounting screws to secure the driv e in place.
Mounting screw
13
www.df .com