Connecting The Telephony Gateway - Arris Touchstone TG3492LG-LIB User Manual

Note: Setting the transmit power level to High increases the range. Setting it to Medium or
Low decreases the range proportionately.

Connecting the Telephony Gateway

WARNING
Risk of injury or equipment damage
Connecting the Telephony Gateway to the home's existing telephone wiring should only be
performed by a professional installer. Physical connections to the previous telephone
provider must be removed and the wiring must be checked; there must not be any voltage.
Cancelation of telephone service is not adequate. Failure to do so may result in loss of
service and/or permanent damage to the Telephony Gateway.
1. Connect one end of the coax cable to the cable outlet or splitter, and the other end to
the Telephony Gateway's Cable connector (5). Tighten the connections by hand, then
tighten an additional 1/8 turn with a wrench.
Note: For best performance, use high-quality coax cable and minimize or eliminate
splitters between the cable jack and the Telephony Gateway.
Release 34 DRAFT 1.1 January 2018
© 2018 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 4: Installing and Connecting your Telephony Gateway
Touchstone TG3492LG-LIB Telephony Gateway User Guide
21