1. Tel 1
2. Tel 2
3. Ethernet (1 - 4)
4. Reset button
Resetting the Telephony Gateway to Factory Defaults
To reset the router to factory defaults, press and hold the Reset button (4) on the back of
the Telephony Gateway for more than fifteen seconds. This restores the wireless setup
configuration and router configuration parameters to the factory defaults. You may need to
do this if a misconfiguration has locked out all access.
Release 34 DRAFT 1.1 January 2018
© 2018 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 6: Using the Telephony Gateway
5. Cable
6. Power
7. Power switch
Touchstone TG3492LG-LIB Telephony Gateway User Guide
34