Keyboards; Serial Mouse - Xycom 9462 System Manual

9460/9460KP/9462/9462KP System Manual

Keyboards

Four keyboards are available for the system: the 8000-KB5, 8000-KB6, 8000-KB7, and
8000-KB8. The following table lists the features of each keyboard.
Keyboard
8000-KB5
8000-KB6
8000-KB7
8000-KB8
Once you mount the keyboard, connect the cable to the keyboard port. Use the
9000-FKA for a NEMA 4-sealed panel mount door for front access to keyboard and ex-
ternal floppy port with mounting hardware
These keyboards are not available in the E.U. (no CE mark).

Serial Mouse

To install Xycom's 4100-MS1 two-button serial mouse, attach the connector on the
mouse cable to COM1 or COM2 on the side panel. If a mouse is used, the ferrite in the
documentation kit must be installed to maintain CE compliance.
If the touch screen is factory installed along with MS-DOS or Windows
3.x, the touch screen is set up on the mouse port (making the mouse port
unavailable). A sticker will be covering the mouse port. If Windows 95
or Windows NT is factory installed, then the touch screen is set up on
COM2 (making the COM2 port unavailable). No sticker will be covering
the mouse port.
To maintain a safe condition, an external keyboard and/or mouse port
must not be used when the unit is operating in the presence of a hazard-
ous environment.
3-14
Available Keyboards
Features
Rack or panel-mounted NEMA 4 104-key QWERTY keyboard with PC/AT interface
Rack-or panel-mounted NEMA 4 numeric keyboard with 52 function keys
Stand-alone 104-key QWERTY NEMA 4 keyboard.
Stand-alone numeric NEMA 4 keyboard with 52 function keys
Warning
Note
Note