Edit; Cut; Copy - Xycom 9462 System Manual

To select a key to define, use the arrow keys to position the cursor on the desired key and
press . After a key is selected, the utility records every key stroke on the external
ENTER
full-stroke keyboard in a macro assigned to the chosen key. As the keys are entered they
are displayed using the chosen format.
Menu, so it is not a recordable key. However,
editor. Changes made to the macros in the Teach Menu are not programmed until you
select Download.

Edit

Displays a graphic representation of the keypad in memory and a menu bar displaying
Exit, Click, and ON/OFF. Exit returns to the Macros menu. Click is not supported. To
select a key to edit, use the arrow keys to position the cursor on the desired key and press
.
ENTER
In edit mode, the macro is displayed as two lines. The top line (the edit line) displays the
macro in either hex or decimal format and is the line in which the actual editing takes
place. The bottom line (the ASCII line) displays the macro in ASCII format and is not
user configurable. This line helps keep track of which part of the macro you are editing,
and will be updated by the utility as editing takes place. For example,
edit line 12 75 F0 75 F0 12 1C F0 1C 12 22 F0 22 F0 12 0
ASCII line sh 8 bk 8
The insert, delete, and cursor control keys are active for editing.
When a key is selected from the Edit Macro option, the menu bar displays the following
choices: Exit, Cut, Copy, Paste, Codes, Hex/Decimal, and I/O
(Insert/Overtype). The macro for the chosen key is also displayed.

Cut

Deletes a sequence of scan codes from the macro. To select a section to cut:
1. Place the cursor on the first character to cut.
2. Press 1 and select
F
. Cut should still be highlighted, but the cursor will appear on the Edit
3. Press
ENTER
line. Move the cursor on the last character to cut and press
4. The last character of every macro is the end of the macro (EOM) and cannot be de-
leted.

Copy

Copies a sequence of scan codes from the macro into memory. To select the section to
copy:
1. Place the cursor on the first character to copy. Press
2. Press . Copy should still be highlighted, but the cursor will appear on the Edit
ENTER
line.
3. Move the cursor on the last character to copy and press
The copied item does not appear on the screen until you select Paste.
Chapter 4 – Programmable Keypad Utility Program (9460KP/9462KP)
stops recording and returns to the Teach
ESC
bk sh a bk a sh X bk X
.
CUT
can be included in a macro by using the
ESC
bk sh EOM
ENTER
1 and select Copy.
F
.
ENTER
.
4-5