Optional Features - Xycom 9462 System Manual

9460/9460KP/9462/9462KP System Manual
•
Three AT bus ¾ length expansion slots
•
•
•
IR Port (IrDA, HPSIR, AND ASKIR compatible)
•
Rear PS/2 keyboard port and mouse port (also front PS/2 keyboard port on 9460KP
and 9462KP)
•
Keypads (9460KP/9462KP only)
•
•
•
Status LEDs
•
•
•
•
•
3.5inch external side access floppy option
•
MS-DOS
cluded)
•
Sealed front panels
•
•
•
UL listed for use in Class I, Division 2 hazardous locations

Optional Features

Following are optional features available for the units:
•
Touch screen - resistive technology with less than 1.5% linearity error
•
9460-DRVNT, Windows NT touch screen driver (included if Windows NT is
ordered preinstalled)
•
9460-DRVOS/2 touch screen driver
•
Large IDE hard drives and solid state drives
•
Preinstalled Windows 95 or Windows NT
•
AHIP5+ board which supports the latest Pentium
•
•
•
•
•
24 VDC power supply
•
Pre-installed PCI 10/100 Base-T Ethernet card
•
9000-EXF, hot installable external floppy drive
•
9000-FKA, NEMA 4 front access panel for floppy port and keyboard port
•
4100-KB2, External full-stroke keyboard
1-2
Two ISA
One ISA/PCI
32 relegendable function keys (64 with the F/A function)
Numeric, PC control, and Alpha keypads
Power
Disk
Com
Input
® ®
(if Windows 95 or Windows NT
9460/9462 to NEMA 4/4X/12 and IP65 specifications when panel mounted
9460KP/9462KP to NEMA 4/4X/12 specifications when panel mounted
Two 72 pin EDO DRAM SIMMs support (8, 16, 32, 64, and 128 Mbytes)
PCI 64 bit video controller, 2 Mbytes video RAM
PCI local bus IDE controller
Two serial COM ports: one RS-232 and one configurable as RS-232 or RS-485
is ordered, MS-DOS is not in-
™
®
technology