Table of Contents
Advertisement
7.4 Install the ILite rental foot alignment tool
Necessary tools
19 mm open ended spanner.
Necessary parts
•
Rental foot spacer plate.
•
Rental foot adjustment plate.
•
One bolt (M12 x 25) per stacker foot.
•
Three bolts (M12 x 16) per stacker foot.
How to install the ILite rental foot alignment tool ?
1. Place a rental foot spacer plate (F) upon two neighboring foot beams as illustrated.
Image 7-6
2. Fasten the spacer plate with two short bolts (E) M12 x 16.
Note: One side of the spacer plate (F) contains three mounting holes. Use the mounting hole which fits the most with the
mounting hole of the rental foot base rails. These base rails where previously installed together with the rental foot.
3. Place a rental foot adjustment plate (H), as illustrated, upon the other side of the two neighboring foot beams.
R5976189 ILITE RENTAL DISPLAY 16/09/2005
7. Basic setup procedures
E
F
43
Advertisement
Table of Contents
