Table of Contents
Advertisement
7.3
Installing the X8 rental tile upon the X8 rental foot
How to install the X8 rental tile upon the X8 rental foot?
1. Ensure that the rental foot is installed well to support the rental tiles.
2. Ensure that both locking handles (reference 1 image 7-3) at the bottom of the rental tile are unlocked. So, handles in vertical
position and pulled out (reference 2 image 7-3)
3. Place the rental tile upon the rental foot. Ensure that the tile and the foot are equally oriented. As a result the locking handles at
the bottom of the rental tile latches and capture the mounting pins of the rental foot below.
4. Fasten both lock handles at the base of the rental tile. Push the handle inwards and turn quarter turn clockwise (reference 3 & 4
image 7-3).
5. Fasten the two clamps at the base of the rental foot (reference 5 image 7-13).
1
1
1
2
Image 7-3
6. Does this rental tile has a neighboring rental tile?
If yes, join two rental tiles sideways with each other as explained and illustrated in the next steps.
If no, go to step 1 of this procedure and install the next rental tile upon the neighboring free rental foot.
7. Fasten the two lock handles (reference 2image 7-4) at the vertical adjoining edge. Push the handle inwards and turn quarter turn
clockwise.
Caution:
Ensure that the side pins of the neighboring tile are captured by the locking handles!
8. Fasten the clamp at the vertical adjoining edge (reference 3image 7-4).
R5905160 X8 RENTAL DISPLAY 25/02/2013
3
3
7. Basic setup procedures
3
5
4
43
Advertisement
Table of Contents
