Join Two Ilite Truss Beams Together - Barco ILite Installation Manual

7. Basic setup procedures

7.10 Join two ILite truss beams together

First attach one row of ILite rental tiles with the ILite truss beams before joining ILite truss beams together.
Necessary tools
10 mm Allen key.
How to join two truss beams together ?
1. Open the side locking mechanism of the truss beam, which you want to join. Use a 10 mm Allen key.
Image 7-38
2. Open the side locking mechanism of the rental tile at the to adjoin side of the truss beam.
Image 7-39
3. Carefully bring the truss beams together. The positioning pins and holes, of the adjoining side, must fit into each other.
Caution: Ensure that both truss beams, with tiles, are lifted at the same height.
Image 7-40
4. Close the side locking mechanism of the truss beam. Use a 10 mm Allen key.
60 R5976189 ILITE RENTAL DISPLAY 16/09/2005