Table of Contents
Advertisement
7.12 Secure a hanging ILite rental display
Necessary parts
Safety steel cables or chains.
How to secure a hanging ILite rental display
1. Lift up the ILite rental display to the desired height.
2. Place a safety steel cable or chain (B) around the truss installation above the ILite display and around the safety rod of the truss
beam. Use one safety steel cable or chain per safety rod.
Warning: The angle between the rental truss beam and the safety cable or chain must be at least 45°.
Note: The illustration below shows a hanging ILite rental display with two truss beams, each secured with two safety cables.
Image 7-50
R5976189 ILITE RENTAL DISPLAY 16/09/2005
7. Basic setup procedures
A
>45°
B
>45°
65
Advertisement
Table of Contents
