Table of Contents
Advertisement
7. Basic setup procedures
4. Fasten each rental foot with two hexagon bolts (D) at the front and with two regular bolts (E) at the rear. Note that at the same
time the stacker feet (S) and stacker level plates (R) will be fixed as well.
R
Image 7-5
5. Level out the foot beams. If necessary place every 50 centimeters shim plates underneath the foot beams. This to prevent that
the beams bend.
6. Firmly attach the foot assemblies to the floor with fixings, or ballast, or both as required.
42
S
R
R5976189 ILITE RENTAL DISPLAY 16/09/2005
Advertisement
Table of Contents
