Repacking Instructions; Foot Protection Buffer - Barco Nio 5MP LED User Manual

5. REPACKING INSTRUCTIONS

W
ARNING
tection buffer to prevent damage to the display.
5.1

Foot protection buffer

To replace the foot protection buffer
1. Place the display on a stable surface.
2. Put the display in the lowest position and fasten the height mechanism, see "VESA-mount installation",
page 10.
3. Very important: Tilt the panel away from the foot before changing the orientation.
4. Turn the panel counterclockwise to put the panel in landscape orientation, see "Display position adjust-
ment", page 7 .
5. Place the connector compartment cover in the foot protection buffer.
6. Slide the foot protection buffer over the foot of the display.
7. Tilt the panel back to the foot.
Image 5-1
K5902121 NIO 5MP LED DISPLAY 18/01/2018
:
Before repacking the display, follow the instruction to replace the foot pro-
5. Repacking instructions
29