Security Measures - Panasonic FX-55 Series Operating Instructions Manual

Security Measures

Use these features to protect your data.
Setting the Supervisor Password/User Password
Set the Supervisor Password before setting the User Password.
1. Start up the Setup Utility. (
2. Select [Security].
3. Select [Set Supervisor Password] or [Set User Password], and press ≪ Enter≫ .
4. Enter your password in [Create New Password] and press ≪ Enter≫ .
When the password has been set, you need to enter your password in [Enter Current Password] and press ≪ Enter≫ .
To disable the password, leave the input field empty and press ≪ Enter≫ .
5. Enter your password again in [Confirm New Password] and press ≪ Enter≫ .
6. Press ≪ F10≫ , and then click [Yes].
Do not forget your password. If you forget your Supervisor Password, you will not be able to use your computer. Contact Panasonic
n
Technical Support.
When running the Setup Utility, do not leave and go away from your computer even for a short time, since other people may set or
n
change the password.
N O T E
The password will not be displayed on the screen.
n
If the [Caution] screen appears when entering the password, check the status of NumLock and Caps Lock.
n
You can use up to 32 alphanumeric characters (including spaces).
n
The case (upper/lower) is distinguished.
Use only the upper horizontal row of numeric keys to input your password.
You cannot use ≪ Ctrl≫ to input a password.
Disabling the Supervisor Password also disables the User Password.
n
Setting the Windows Password
To set the password, proceed as follows.
The Windows password will be applied when you sign in to Windows, or resume the computer from the Lock screen.
1. Click (Start) -
2. Click [Add] under "Password".
Check the status of NumLock and Caps Lock.
n
N O T E
Set the key entry mode to English ("ENG") and enter characters.
n
Starting the Setup Utility)
I M PO R TAN T
(Settings) - [Accounts] - [Sign-in options].
I M PO R TAN T