Panasonic FX-55 Series Operating Instructions Manual page 141

<Only for model with LAN/2nd LAN>
LAN transmission speed slows down
noticeably.
<Only for model with wireless LAN/2nd
wireless LAN>
Wireless LAN connection is cut.
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,
[Flight mode]/[WiFi]/[WiFi 2] may be displayed instead of [Airplane mode]/[Wi-Fi]/[Wi-Fi 2] in some language preference.)
Touchpad / Touchscreen (only for model with touchscreen)
The pointer does not work.
Cannot input using the touchpad.
<Only for model with touchscreen>
Cannot point the correct position using the
pen (included) and fingers.
microSD Memory Card
Cannot use a microSD Memory Card.
Smart Card (only for model with Smart Card slot)
Cannot use a Smart Card.
Change the power plan to [Best performance]. (
Connect the external mouse correctly.
Restart the computer using the keyboard.
If the computer does not respond to keyboard commands, read
Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility.
The touchpad may be disabled by some mouse drivers. Check your mouse's operating instruc-
tions.
Press both buttons of touchpad at same time.
The touchpad is disabled.
Press ≪ Fn≫ + ≪ Esc≫ to enable.
Perform the Calibrating the Screen.
Set [microSD Card Slot] to [Enabled] in the [Advanced] menu of the Setup Utility.
This computer does not support the maximum speed some types of microSD / microSDHC /
microSDXC Memory Cards guarantee.
Insert the Smart Card correctly.
Set [Smart Card] to [Enabled] in the [Advanced] menu of the Setup Utility.
To use a Smart Card, you need a specified software and driver.
Configuring Power Saving Settings)
"No response".