Technical Information - Panasonic FX-55 Series Operating Instructions Manual

Technical Information

Network Connections and Communications Software
Close the communications software before using the power saving function.
If the power saving function (sleep or hibernation) is activated while communications software is used, the network connection may be
interrupted, or the performance may be adversely affected. In this case, restart the computer.
In a network environment, set [Never] for [Sleep after] and [Hibernate after] (
About Fast startup
The fast startup is enabled as the factory default.
If the computer shut down by the following steps, the fast startup will be disabled at next boot-up.
1. Click (Start) -
2. Click [Restart now] under "Advanced startup"
3. Click [Turn off your PC].
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,
[Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.)
If you perform the following steps, the fast startup function becomes always disabled.
1. Click (Start) -
2. Click [Change settings that are currently unavailable].
3. Remove checkmark from [Turn on fast startup (recommended)] in "Shutdown settings".
(Settings) - [Update & Security] - [Recovery].
*1
.
(Settings) - [System] - [Power & sleep] - [Additional power settings] - [Choose what the power buttons do].
Setting Sleep or Hibernation).