Using The Bluetooth Function - Panasonic FX-55 Series Operating Instructions Manual

Bluetooth
<Only for model with Bluetooth>
You can access internet and other Bluetooth devices without connecting cables.
N O T E
Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or body.
n
To use Bluetooth, set
n
Utility.
The transmission rate will be lower when a microwave oven is used near by.
n
When you uninstall the Bluetooth Driver, turn Bluetooth off.
n

Using the Bluetooth Function

Before using a Bluetooth, turn the Bluetooth communication on.
Turning on/off the Bluetooth communication
1. To enable the wireless communication (
2. Click (Start) -
3. To turn off the Bluetooth communication, set "Bluetooth" to [Off].
To turn on the Bluetooth communication, set "Bluetooth" to [On].
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For
example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference.)
To check the Bluetooth communication status
1. Click
(Start) -
N O T E
You can also clicking
n
munication status.
[Bluetooth] to [Enabled] (default) in the sub-menu of [Wireless Configuration] in the [Advanced] menu of the Setup
Disabling/Enabling Wireless
(Settings) - [Network & Internet] - [Airplane mode]
(Settings) - [Devices] - [Bluetooth & other devices].
on the task tray, and then click
Communication).
*1
, and set "Airplane mode"
(Bluetooth Devices) - [Show Bluetooth Devices] to check the com-
*1
to [Off].