Connecting/Disconnecting The Computer - Panasonic FX-55 Series Operating Instructions Manual

D. HDMI Port
Connector for HDMI compatible digital display.
On the monitor connected to the HDMI port or VGA port of the port replicator, content protection images by HDCP (High-bandwidth
Digital Content Protection system) cannot be displayed.
It is not compatible with the analog display.
The display specifications of the maximum resolution, etc. that can be output differ according to the specifications of the device con-
nected. For details, refer to the specifications of the device connected.
E. VGA Port
F. Serial Port
It does not support serial mouse.
G. Security Slot
A Kensington cable can be connected.
For more information, read the manual that comes with the cable.
<Front>
H. Expansion Bus Connector
This connects to the expansion bus connector on the bottom of the computer.
I. Lever
Slide the lever all the way back to release the computer.
J. Power Switch
This operates identically to the power switch on the computer.
<Left>
K. USB 2.0 Ports (2 ports)

Connecting/Disconnecting the Computer

If an external display is connected to both the computer and port replicator, the computer may not be shut down properly.
n
I M PO R TAN T