Panasonic FZ-55 Quick Start Manual

Ssd pack

Hide thumbs Also See for FZ-55:

Download this manual

SSD Pack

Inserting/Removing the SSD Pack

You can replace the SSD Pack.

Back up all the important data before removing the SSD Pack.

If you need to read the SSD Pack data on another computer for repair or any other purpose, set

menu of the Setup Utility before removing the SSD Pack.

Carefully remove/insert the SSD Pack since the SSD Pack is extremely sensitive to shock. Note that static electricity may affect some internal com-

ponents.

1. Turn off the computer.

Do not use sleep or hibernation.

Perform the following steps to turn off the computer.

1. Click

2. Click [Restart now] under "Advanced startup".

3. Click [Turn off your PC].

2. Disconnect the AC adaptor, remove the battery pack. (

Remove the second battery pack. (

3. Insert/Remove the SSD Pack.

To remove <SSD pack (FZ-VSDR55)>

1. While sliding the latch (A), lift the SSD Pack (B) and slide it out of the slot.

To remove <SSD Pack (FZ-VSD551)>

1. While sliding the latch (C), pull out the SSD Pack (D).

To insert <SSD pack (FZ-VSDR55)>

I M PO R TAN T

(Start) -

(Settings) - [Update & Security] - [Recovery].

Replacing the Battery

Pack)

[Hard Disk Lock]

to [Disabled] in the [Security]

Page 1 SSD Pack Inserting/Removing the SSD Pack You can replace the SSD Pack. I M PO R TAN T Back up all the important data before removing the SSD Pack. If you need to read the SSD Pack data on another computer for repair or any other purpose, set [Hard Disk Lock] to [Disabled] in the [Security] menu of the Setup Utility before removing the SSD Pack.
Page 2 1. Insert the projection part (E) of the SSD pack into the (F) part, and attach it while lowering until it clicks. To insert <SSD Pack (FZ-VSD551)> 1. Slide the SSD Pack in parallel with the arrow direction until it click to the secured position. 4.