Panasonic FX-55 Series Operating Instructions Manual page 135

Other startup problems.
Cannot turn off the computer.
Cannot enter sleep or hibernation.
Cannot enter sleep or hibernation auto-
matically.
Entering Password
Forgot the password.
Even after entering the password, pass-
word input screen is displayed again.
Start in the Setup Utility ( Setup
words) to the default values. Start the Setup Utility and make the settings again.
Remove all peripheral devices.
Check to see if there was a disk error.
1. Remove all peripheral devices including an external display.
2. Right-click
(Start) - [File Explorer].
3. Click [This PC].
4. Right-click [Windows (C:)], and click [Properties].
5. Click [Tools] - [Check].
A standard user needs to enter an administrator password.
6. Follow the on-screen instructions.
Remove all peripherals.
It may take 1 or 2 minutes to turn off the computer.
Remove USB devices temporarily. If the problem persists, restart the computer.
It may take 1 or 2 minutes to enter sleep or hibernation.
The computer does not enter sleep or hibernation immediately after resuming. Wait approx-
imately 1 minute.
Disconnect peripheral devices.
If you connect to a network using wireless LAN function, select the profile and connect to the
access point ( Disabling/Enabling Wireless
If you do not use wireless LAN function, turn off wireless LAN function (
Wireless Communication).
Make sure that you are not using any software that regularly accesses the flash memory.
Supervisor Password or User Password: Contact Panasonic Technical Support.
Administrator password:
If you have a password reset disk, you can reset the administrator password. Set the
disk and enter any wrong password, then follow the on-screen instructions and set a
new password.
If you do not have a password reset disk, reinstall (
Windows, and then set a new password.
The computer may be in ten-key mode. If the NumLk indicator
Lock≫ to disable the ten-key mode, and then input.
The computer may be in Caps Lock mode. If the Caps Lock indicator
Lock≫ to disable the Caps Lock mode, and then input.
Enter the password using the same keyboard that was used to set the administrator password
or user password, as the key layouts of the on-screen keyboard and some external keyboards
may differ.
Utility) to return the Setup Utility settings (excluding the pass-
Communication).
Installing
Disabling/Enabling
Software) and set up
lights, press ≪ Num
lights, press ≪ Caps