Panasonic FX-55 Series Operating Instructions Manual page 136

[Enter Password] does not appear when
resuming from sleep/hibernation.
Cannot sign in to Windows using the face
recognition for Windows Hello outdoors.
Display
No display.
The screen is dark.
The screen is disordered.
Select [Enabled] in [Password On Resume]
The Windows password can be used instead of the password set in the Setup Utility.
To add a password, set up the following.
1. Click
(Start) -
2. Click [Sign-in options], and click [Add] under "Password".
3. Create a password.
4. Click [Next].
5. Click [Finish].
6. Select [Every Time] under "Require sign-in".
If you have registered the face recognition indoors, you may not sign in to Windows using the
face recognition outdoors. In such cases, please add Windows Hello face recognition outdoors.
Perform the following procedure.
1. Sign in to Windows.
2. Click (Start) -
3. Click [Sign-in options].
4. Click [Improve recognition] under "Windows Hello" and then click [Get started].
5. "Making sure it's you" is displayed, input PIN number.
6. Since additional registration of face recognition starts, follow the on-screen instruc-
tions.
If you cannot register the face recognition outdoors properly, try to take the following measures.
In the shade, register your face with your back against the wall that does not reflect the
light.
The external display is selected. Press ≪ Fn≫ + ≪ F3≫ or ≪
display. Then click the display mode.
When using an external display,
Check the cable connection.
Turn on the display.
Check the settings of external display.
The display is turned off by the power-saving function. The screen returns to the original state
when you operate keyboard, touchpad, or touchscreen (only for model with touchscreen).
When operating the keyboard, press a key that does not affect the computer operation, such as
≪ Ctrl≫ .
The computer entered sleep or hibernation by the power-saving function. To resume, press the
power switch.
The screen is darker when the AC adaptor is not connected. Press ≪ Fn≫ + ≪ F2≫ and
adjust the brightness. As you increase the brightness, battery consumption increases. You can
separately set the brightness for when the AC adaptor is connected and when not connected.
Press ≪ Fn≫ + ≪ F8≫ to turn off the concealed mode.
Under factory default settings, the brightness of the display screen will adjust automatically
based on the ambient light detected by the ambient light sensor. You can adjust the settings for
this sensor. ( Automatic brightness
Changing the number of display colors and resolution may affect the screen. Restart the com-
puter.
Connecting/disconnecting an external display may affect the screen. Restart the computer.
Resuming from sleep or hibernation may affect the screen of the external display. Restart the
computer.
in the [Security] menu of the Setup Utility.
(Settings) - [Accounts].
(Settings) - [Accounts].
adjustment)
≫ + ≪ P≫ to switch the