Panasonic FX-55 Series Operating Instructions Manual page 62

shown in the illustration.
Do not insert the nanoSIM card upside down.
n
6. Close the nanoSIM card slot cover (C), attach it and tighten the screw (B) firmly.
Use the PH 1 (PH #1) screwdriver.
The screw used is 1.
Recommended tightening torque
0.45 N•m ± 0.05 N•m (4.5 kgf•cm ± 0.5 kgf•cm)
7. Close the cover (A).
If the cover is not closed, the nanoSIM card may jump out when the computer falls.
8. Insert the battery pack and connect the AC adaptor.
To remove a nanoSIM card
1. Turn off the computer.
2. Disconnect the AC adaptor, remove the battery pack. (
<When using second battery pack>
Remove the second battery pack. (
3. Open the cover (F).
4. Remove the screw (G) and the nanoSIM card slot cover (H).
5. Push the nanoSIM card.
It will come out of the slot a little bit.
6. Pull the card all the way out.
I M PO R TAN T
Replacing the Battery
Replacing the Battery Pack)
Pack)