Panasonic FX-55 Series Operating Instructions Manual page 15

6. Select the drive, and in the case of DVD/BD media, select the disc type.
7. Click [Next].
8. In the case of DVD/BD media, select the [Write Speed].
9. Click [OK].
Creation of the recovery disc (i.e., writing) starts. Wait a moment for the process to complete.
10. Finish creation of the recovery disc as follows.
For DVD/BD media
1. Remove the disc when "Recovery disc #1 complete." appears, and label the disc to avoid losing it.
Do not use sharp objects that may leave a mark.
2. If the recovery disc spans multiple discs, insert the next disc.
3. Click [OK].
4. Follow the on-screen instructions to create all the recovery discs.
5. Click [OK] on the "All recovery discs complete." screen.
For USB storage devices
1. Click [OK] on the "All recovery discs complete." screen.
2. Perform "Safely Remove Hardware and Eject Media", and remove the USB storage device.
N O T E
The disc created with this utility is only for this computer. You cannot use for others.
n
Additional applications cannot be recovered even if you use a recovery disc created with this utility.
n
If you fail to create a recovery disc or an error message appears, try either of the following procedures.
n
Insert the disc or USB storage device correctly.
Check the disc or USB storage device condition.
Restart the computer and try to create a recovery disc again.
Contact Panasonic Technical Support.