Panasonic FX-55 Series Operating Instructions Manual page 97

Format
UDF2.6 Standard format for BD-R discs as established by the Blu-ray Disc Association is sup-
ported by the Windows 10. This format is used for Blu-ray recorders or PC recording soft-
ware conforming to "Video Recording Standards" as established by the Blu-ray Disc
Association.
Formatting method
When formatting is executed, data recorded on the disc is erased. Back up data as required.
1. Set the disc in the optical disc drive.
2. Close all applications that use the disc.
3. Right-click (Start) - [File Explorer].
4. Click [This PC].
5. Right-click the optical disc drive, and click [Format...].
6. Select the settings and click [Start].
When the disc was recorded with Power2Go and you want to record using Explorer, remove the check mark from [Quick Format].
It may take long time if you removed the check mark from [Quick Format].
Do not cancel formatting partway. Otherwise the disc may no longer accept writing.
If you have written using Power2Go, you cannot write using other software since the format becomes different. To make this possible,
n
remove the check mark for [Quick Format] on the format display and format the disc.
Feature
I M PO R TAN T
Support
BD-R BD-RE
Ο X