Panasonic FX-55 Series Operating Instructions Manual page 138

Cannot enter special characters (ß, à, ç,
etc.) and symbols.
Disc Operation (only for model with optical disc drive)
The optical disc drive does not work nor-
mally.
Cannot play back TV programs recorded
on a commercial DVD recorder.
A blue background appears on the screen
when playing an MPEG image.
The optical disc drive vibrates excessively
or makes noise.
Cannot eject a disc.
The disc tray does not close.
Other disc operation problems.
Network
Cannot connect to a network.
Use the character map.
1. Click (Start) - [Windows Accessories] - [Character Map].
Set [Optical Drive] to [Enabled] in the [Advanced] menu of the Setup Utility.
Clean the lens ( Optical disc drive handling
Check the disc condition ( Disc handling
Finalize the disc on the DVD recorder when the program was recorded in video mode on DVD-
R/RW or in VR mode on DVD-RW.
You opened the optical disc drive or removed the MPEG disc while it was operating. Re-insert
the MPEG disc and close the optical disc drive.
Insert the disc correctly.
Check the disc condition ( Disc handling
When writing to CD-R/RW using Power2Go, you can minimize vibration while writing by using
the writing speed at [10x] or less.
Turn on the computer.
To remove a disc when the computer is powered off, insert a pin of 1.3 {±0.05} mm in diameter
into the emergency hole (A). (When the diameter of the pin is smaller than this, insert the pin
slightly downward.) Pushing it completely to the end will free the tray so that it can be pulled out.
If a disc with fingerprints or other dirt is used, you may not be able to remove it. Use a clean disc.
( To clean discs)
Do not touch the eject button when closing the tray.
Use another drive or media.
Set the device ([LAN] / [LAN (2nd)]
[Enabled] in the [Advanced] menu of the Setup Utility.
care).
care).
care).
/ [Wireless LAN] / [Wireless LAN (2nd)] / [Wireless WAN]) to