Using The Bluetooth Function - Panasonic CF-W8EWDZZ2M - Toughbook Executive W8 Reference Manual

Bluetooth
<Only for model with Bluetooth>
NOTE
Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand.
When Bluetooth is installed, [Bluetooth] is displayed in the [Advanced] menu of
Setup Utility. To use Bluetooth, set [Bluetooth] to [Enabled] (default) in the
[Advanced] menu of the Setup Utility.
The transmission rate will be lower when a microwave oven is used nearby.
It may take some time to turn off Bluetooth after switching the wireless switch to off.
When you uninstall the Bluetooth driver, turn Bluetooth off.

Using the Bluetooth Function

Before using Bluetooth, turn the Bluetooth communication on.
1
Slide the wireless switch to turn on/off Bluetooth.
The Wireless Switch Utility icon appears in the notification area when the
computer is turned ON. It shows the status of Bluetooth.
• : Indicates that Bluetooth is on.
• : Indicates that Bluetooth is off.
• : Indicates that Bluetooth has been disabled in the Setup Utility.
When you also use other wireless functions, refer to "Disabling/Enabling Wireless
Communication" (
To check the Bluetooth communication status
Place the cursor over the Wireless Switch Utility icon on the notification area.
A
A tooltip appears.
page 89) .
99
CF-F8 Series
A
CF-W8/CF-T8 Series
A
CF-F8 Series
CF-W8/CF-T8 Series
WIRELESS