Connect The Cable; Turn On The Computer - Panasonic CF-T2 Series Reference Manual

LAN
Connecting LAN
When using the computer as a network computer, some additional settings may have to be
made depending on the usage conditions. We recommend asking your system administrator
or the person in charge of the network.
CAUTION
Do not connect the modem telephone cable into the LAN port.
1
Power off your computer.
( ⇒ Operating Instructions "Starting Up/Shutting Down")
Do not shut down using the standby or hibernation function.
2

Connect the cable.

Connect the LAN port (A) and the network system (server, HUB, etc.) using a LAN
cable.
3

Turn on the computer.

CAUTION
Do not use the standby or hibernation functions during communications (except when
the Wake Up from LAN function is in use), as this may cause an error in data
transmission or reception. The timeout function may engage even during data
transmissions, causing the computer to automatically go into standby or hibernation
mode. When not using the Wake up from LAN function, we recommend disabling the
timeout function using the following menu.
Windows XP
[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power
Schemes]
Windows 2000
[Start] - [Settings] - [Control Panel] - [Power Options] - [Power Schemes]
80