General; Standard Composition; Main Features - IAI CV-M40 Operating Manual

1. General

CV-M40 is a compact monochrome progressive scan camera designed for automated imaging
applications. The 1/2" CCD with square pixels offers a superb image quality. The double speed
and partial scanning and vertical binning allow the camera to capture high quality images with a
high frame rate.
The camera can operate in continuous mode and with triggered edge pre-select and pulse width
controlled shutter. Frame delayed read out and vertical binning are also possible modes.
CV-M40 revision D has a new CCD sensor with 6 dB higher sensitivity than revision C.
The latest version of this manual can be downloaded from: www.jai.com
The latest version of Camera Control Tool for CV-M40 can be downloaded from: www.jai.com
Revision D starts with S/N E504301.
For camera revision history, please contact your local JAI distributor.

2. Standard Composition

The standard camera composition consists of the camera main body.

3. Main Features

•
1/2" progressive scan monochrome interline transfer CCD sensor
•
659 (h) x 494 (v) 9.9 µm square pixels compatible with VGA format
•
Improved sensitivity and reduced smear
•
60 full progressive frames per second
•
120 frames per second with vertical binning
•
234 frames per second with 1/16 (30H) partial scanning
•
Programmable partial scan from 15H to 413H in 1H steps
•
Shutter speeds from 1/125 up to 1/12,000 sec in 8 steps
•
Programmable shutter 2H to 513H
•
Internal, external HD/VD or random trigger synchronization
•
24.5 MHz pixel frequency and 31.468 kHz line frequency
•
Pixel clock and WEN output
•
Edge pre-select and pulse width external trigger modes
•
Edge pre-select shutter with frame delay read out
•
H reset and H non-reset trigger mode
•
Accepts standard C-mount lenses
•
Setup via serial port or switches
•
Setup by Windows 98/NT/2000 software via RS 232C
CV-M40
- 2 -