Table of Contents
Advertisement
Features
The SW-4000M-PMCL is a line scan camera equipped with a 4096-pixel CMOS linear sensor.
The camera has a Camera Link clock of 84.82 MHz and is capable of high-speed scanning at up to
199.5 kHz (Line Rate). 8-bit and 10-bit video output is possible via Camera Link.
Camera and external trigger settings are configured via the Camera Link interface or the 12-pin
connector.
Camera Link compatible interface
• Video outputs can be used as trigger inputs.
Output formats
You can choose from 8-bit, and 10-bit output.
Variety of pre-process functions
• Variable pixel size
The pixel size can be changed by switching between the 7.5 × 7.5 µm (default) and 7.5 × 10.5 µm
operation modes.
• LUT (Lookup Table)
Programmable control over gamma and contrast is possible.
• Gamma correction
Gamma can be set to 1.0, 0.9, 0.8, 0.75, 0.65, 0.6, 0.55, 0.5, or 0.45.
• Shading correction (flat field)
Non-uniformity (i.e., shading) in the amount of light generated by the lens and lighting equipment can
be corrected.
• Variable line rate
By varying the line rate, the scanning speed of the camera can be matched to the feeding speed of
the object, and the accumulation time can be lengthened to increase sensitivity.
Connection example:
AC adapter
External trigger
Frame grabber
board
Camera
— 6 —
SW-4000M-PMCL
Computer
Advertisement
Table of Contents
