Connecting A Video Source Using Hdmi - Christie Roadie D4K40-RGB Installation And Setup Manual

Input configuration
One-Port
This card may or may not be included with your model. Standard inputs are subject to change. Refer
to the D4K40-RGB Specifications Guide (P/N: 020-102959-XX) for more details.
Related information
TDPIC video formats (on page 51)

Connecting a video source using HDMI

The Twin HDMI input card (THIC) accepts digital video data from HDMI sources.
Part number: 108-311101-XX
The input configurations listed below are supported.
Input configuration
Four-Port
One-Port
D4K40-RGB Installation and Setup Guide
020-102961-06 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Connecting devices and establishing communication
Description
Enables connection of one DisplayPort cable to a TDPIC
card or one QDPIC card. In this configuration the
DisplayPort input supplies the entire video raster.
Description
Enables connection of four HDMI cables to two THIC cards.
Each HDMI input supplies one quadrant or column of a 4K
input image. This configuration supports high resolution and
high frame rate input video streams.
Enables connection of one HDMI cable to the 1-IN input of a
THIC card (in any slot). In this configuration, the HDMI input
supplies the entire video raster.
Requirements
One TDPIC card or one
QDPIC card
Requirements
Two THIC cards
One THIC card
44